Showing posts with label IWL Troll. Show all posts
Showing posts with label IWL Troll. Show all posts

Sunday, November 19, 2017

Remembrance Day Scooter Ride 2017


It's been several years since I've taken the Troll out for a run, but on 12 November there was a scooter run in Fremantle. The 12th was my birthday and that alone was good enough reason to pull the beast out of the shed and hit the road.

Despite not having been ridden in two years the Troll fired straight up and needed little more than a quick lube here and there.

The Remembrance Run was organized by South Side Scooters and they did a great job of spreading the word across the scootering community. The event even got a write up in the local paper. https://communitynews.com.au/fremantle-gazette/news/perth-scooter-gathering-and-poppy-run-to-see-south-side-scooterists-pay-remembrance-respects/

Several SIVA members and fellow travelers attended. Ron De Pannone on his Lambretta Li, Andy Montgomery on this Vespa 150, James Long on his Honda Spacey, Tony Wong on his Lambretta LD and Greg Eastwood on his Heinkel Tourist.

Tony's lovely Lambretta LD. The oldest scooter on the run.



The Troll - solid and reliable like a Soviet tractor and just as pretty.

Greg's Heinkel Tourist is a thing of beauty

While James' Honda Spacey is.... 'uniquely styled.' But it is way more powerful and reliable than the Vespas and Lambrettas.

124 scooters attended - a fantastic turnout!

The route took us along the coast to Cottesloe, then through Mosman Park and back to Fremantle.





Getting started ready for wind resistance



One of Tony Wong's cool photos. All the stylish photos in this post are his.

Great photos from Mark Nagle.

See link to his Facebook page https://www.facebook.com/pg/PhotographyByMarkNangle/photos/?tab=album&album_id=1125112197624289




The Troll ran extremely well, although I was at the back of the pack most of the run. Quite a few Lambrettas stalled along the way (probably weighed down with all the surplus mirrors). Old fuel was the common complaint.

Andy and James

Greg on the Heinkel. Gotta love the helmet.


I made it all the way back to Fremantle without incident but Greg's Heinkel stopped running about 100 metres from the end point while we were waiting for the stragglers to catch up. I stuck around for a while to help him out before I headed home. It was a great start to my birthday.

Greg pushes the Heinkel the last 100 metres. Lesson for the future - never switch off your engine!

Tony W as 'tail gun Charlie'
A brief video of the start.

Monday, February 27, 2012

Troll Auspuff


The Troll was off the road for most of last year due to problems with its kick-start, steering and gearbox. The guys at The Vespa Shop got her fixed up smartly once I'd finally tracked down the replacement parts. I must admit that it felt strange riding her after so long. I found myself struggling again to remember which side was the gear change and which was the brake! One thing I did notice though was the engine was very spluttering and smoky.

A major part of the problem is the quality of the reproduction exhaust (May 2009 - http://www.heinkelscooter.blogspot.com.au/2009/05/running-in.html). Reproduction exhausts are available from a number of suppliers such as http://www.ost2rad.com http://www.sausewind-shop.com and other vendors on German ebay. The original exhaust was made from a long extruded tube that wrapped around itself much like a paper clip. All the seams in the original exhaust were welded making it very robust. The reproduction exhaust however was constructed of several interlocking pieces, making it much easier to manufacture but requiring a larger number of joins. None of these joins are sealed.

Shortly after I began running in the Troll in May 2009 the exhaust began to leak. The leaks were small though and a smear of sealant was enough to plug them. But over time it seems the exhaust has warped under pressure and heat and basically every seam was spewing gas, coating the sides and underside of the scooter in black soot. When parked, black oil residue dripped from a dozen places.

So it was time for a backyard repair. The exhaust was surprisingly easy to remove. A single bolt holds the exhaust to the footplate and a compression ring joins it to the exhaust pipe. It was positively filthy. The component parts were easily dismantled by removing two bolts at the front of the exhaust and all were given a good wash in degreaser.

The chrome came up well and all the soot was removed. After drying off I reassembled the parts. They are generally badly fitting and required a very liberal smearing of exhaust sealant around every join.

It was a bit of an effort to get the exhaust back on - these things are always easier to remove than reinstall - but I was pleased with the result. Although it hasn't completely solved the problem - there are still a few minor leaks - it's working much better than before as most of the exhaust is going out the back end, as it should. Next weekend I'll give her another good run and see if this has improved the performance. Maintaining pressure in the exhaust is critical to obtaining the correct compression in the engine and a leaky exhaust will substantially degrade the performance of a two-stroke engine.

One more point. I normally use Silkolene synthetic two-stroke scooter oil in all my machines. I find it works well and is low smoke. On a whim however I tried Valvoline racing two-stroke oil, which sold itself as a performance product with low smoke. In my experience to date it hasn't quite lived up to that claim. Maybe it is a better product and I've just used too much but the Troll now looks and smells like an archetypical East German machine, trailing an enormous cloud of blue smoke behind it. I'll give it another crack when I get to the bottom of this tank but if it doesn't improve I'll be saving the Valvoline only for East German car rally's!


Update 4 March 2012

I took the Troll out for a series of runs to test the resealed exhaust. I was pleased to note that the repairs provided a definite improvement on performance. The engine was a lot quieter and much more grunt. It was easy to run her up to 70 kph and I could feel that she had more in her. I should also mention I cleaned the carburetter.

That said though, the exhaust still leaks, but not as badly as before. Of course the leak is on the seam at the top of the exhaust where it bolts onto the floor plate so I'll need to remove it and reseal it again.

Since cleaning up the exhaust last week it's been easier to find where it is still leaking. If it can't be sealed up I might consider welding all the joins to solve the problem for good.

Update 10 March 2012

This weekend I removed the exhaust and re-examined the seals. The seal under the mounting bolt had completely opened up again.

I filled the exhaust with water to precisely locate the leak. The still shot doesn't quite do it justice but water pretty much gushed out of the seam on the left hand pipe.

The leak was far to serious for a smear of sealant so it was out with some exhaust tape. It's an unattractive but last ditch solution. After reinstalling the exhaust I took the Troll for a long ride to cure the silicone tape. I'm afraid I'm not convinced it has actually worked as there is already a long run of black oil along the edges of the tape. I think it's time to look for a replacement.

Thursday, January 12, 2012

Happy New Year 2012

Merry Christmas! Happy New Year! Welcome to 2012. I'm looking forward to an exciting year ahead. The long awaited DKW is due to arrive at the beginning of February. Importing the car has been a long and tiring exercise - not least for the seller - but its almost over now. I'll write up a summary of the process and its challenges shortly.

Outside the iconic Dingo Flour building in Leighton.

After several weeks of unseasonably wet weather the Christmas and New Year were days of glorious sunshine so I tuned up the Ariel and took her out on a couple of long runs to Fremantle, up the coast and around the river. It was a real pleasure to be out on the road and the bike ran like dream. Whenever I stop when I'm out with the bike people always come over for a chat, even on a run up to the local shops. Of course I enjoy the chat. It's always a pleasure to share the interest with people.

I often ride past the port where the roll-on roll-off ships berth. At Christmas the 'Hoegh Africa' Autoliner was in port delivering a load of heavy industrial vehicles and what looked like a fleet of Hyundai's. I stopped to watch the ship leaving port and wondered whether the Deek would be hitching a ride shortly.

The following week I got my answer - No. The Deek was booked on the MV Tijuca, currently on route from Southhampton, UK to Port Elizabeth, South Africa with a load of luxury cars aboard. After Port Elizabeth she will stop in Durban on the 20th of January where she picks up the Deek and heads across the Indian Ocean.

Here is a handy link that actually gives the GPS co-ordinates of the ship.
http://www.marinetraffic.com/ais/shipdetails.aspx?MMSI=259805000
On 16th of January she was off Cape Town, South Africa.

As I rode along I noticed this Ford Thunderbird parked dockside. I wonder if its a recent arrival or is awaiting shipping? I'll have to keep an eye out for it at Big Al's Poker Run this February. http://www.bigalspokerrun.com.au/index.html

"And during the meanwhilst..."*
Sadly the Ariel is the only one of my machines fit for the road. The Troll broke down again shortly after I got it back on the road. Firstly the steering started to become unstable. At only 70 kilometres per hour the front end shuddered disturbingly, but there did not appear to be anything obviously wrong. I was about to take the Troll back to the Vespa Shop for a thorough going over but then the kickstarter broke and she wasn't going anywhere.

It took a couple of months to get the Troll dropped off at the Vespa Shop and then, after diagnosis (sheered teeth on the kickstarter damaging the gearbox), it's taken almost two months to source the replacement parts. I'm hoping the Troll will be back on the road by February as I want to drop the Ariel off for a bit of tender love and care.

The Vespa has been off the road even longer than the Troll. It is now most definitely displaying all the signs of a poor quality Asian restoration. Almost all of the 'chrome' has degraded to rust - despite the Vespa having hardly been on the road and always stored under cover in my garage. Poor quality shabby reproduction rubbish!

More seriously the rear wheel is dangerously loose making the scooter unroadworthy. According to Ivo at the Vespa Shop this is a common problem in Balinese and Vietnamese restorations and is due to the use of poor quality materials that are not designed to bear the kind of forces associated with road use. I found this out to my surprise when I replaced the Vespa's exhaust back in 2009. Instead of correct sized automotive parts, the exhaust was held on by roofing bolts which where the wrong size and packed out with washers. Even the engine and rear axle is mounted using a jumble of household odds and ends. They might last for a while - two years in my case - but they always fail and if it fails on the road the results can be catastrophic. Ivo has seen this dozens of times and it infuriates him as it only takes a small effort to use the right quality parts to avoid this issue in the first place.

If you own a Balinese or Vietnamese Vespa I can only suggest you get it properly checked over.
For a great insight into dodgy Asian Vespa restorations go no further than Brett's blog - The 71 Sprint V and Me - http://71sprintveloce.blogspot.com/

This is not to say the Vespa is a write-off. It still runs pretty well and remains a handsome machine. When I get the time and money I'll have her fixed up so that it's road safe and then I'll sell it. I really don't have the space or time to ride it anymore.

And finally there's the Heinkel, which remains in stacked in a pile of boxes at the Vespa Shop. For a variety of reasons neither the guys nor myself have attempted to tackle the restoration. I think I'll bring it all home again shortly and put the project on ice for the time being. With the DKW due in shortly I expect I'll be busy over the coming months. As crazy as it may sound, the cost of the DKW including shipping, is probably on par with what it would end up costing me to complete the Heinkel restoration! http://www.vespashop.net.au/

Monday, January 11, 2010

Scootering ups and downs


It's been a challenging couple of weeks on the scooter front. After the Troll's poor showing on the Piaggio run I went over the carby, flushed the fuel system and installed a new petrol tap. The result was almost immediate and the Troll ran like a dream again. I took it on a couple of rides around Fremantle and around the river and actually began to think that everything was looking good. It wasn't too be though.

On the last Sunday of 2009 I joined an early morning ride organised by a couple of guys I used to work with. They were riding a Vespa PX and a Lambretta. It was a long route that took us from Fremantle, along Canning Highway into the city (the long by slow road), through to Kings Park overlooking the city and then down to the coast, turning south back to Fremantle and then along the river to Como. As it was starting early, I was running late. I missed the first rendevous at the Lucky Shag bar, then missed the second rendevous at Kings Park but was only about five minutes behind the pack. I headed straight for the coast aiming to cut them off at the pass but missed them again (little did I know I had actually overtaken them). But I didn't really mind. The Troll was running really well; the engine never skipped a beat, and I was enjoying myself immensely. After about an hour and half on the road I eventually reached Fremantle again and then, just as I pulled into the carpark outside Little Creatures brewery, the engine died. The others all then arrived, just in time to see me stalled at the side of the road. A couple of guys tried to give me a push start but she just wouldn't go. I walked her into the carpark. It was a stinking hot day and the consensus was vapor lock so we settled in, had a beer and waited.

Sean's Lambretta

The waiting didn't do me any good though. The Troll resolutely refused to start. When the kickstarter broke it was kind of game over. I bid adieu to the guys and began pushing the Troll home. It was a hot day - 40c - and it took me 75 minutes to get her home. My enthusiasm for scooters was sorely tested that day. So the Troll is now out of action until I get the kickstart looked it.

So it was back to the Vespa again! Actually the Vespa has been very good to me. I hadn't used in so long that I'd forgotten what a pleasure it is to ride. Even after months without use it still turned over on the second or third kick. Over the past couple of weeks the Vespa has taken a bit of hammering. Then, I was riding it back from the hardware store last week when the back end went all soft on me and I started sliding all over the road. The rear tyre had blown. I was lucky to bring her safely to a stop, not least because it had been a very hot day and 'I'm only going up the shops' I was wearing only a T-shirt and shorts. Coming off would not have been pretty. So, again I ended up pushing a scooter. Fortunately I was only about 500metres from home.

This was the first tyre I've had to change on any of the bikes and I must say it was much easier than I had expected. Five bolts hold the tyre and rim to the wheel, which slips off easily. The spare simply bolts into place. It took only fifteen minutes. Here's a couple of shots of the patient.
Lie still, this won't hurt a bit!

One comes off, the other goes on.

I've so enjoyed riding the Vespa lately that I've decided to make a few minor mods to improve her performance. I'll shortly be installing a Sito exhaust which should give her an extra couple of kilometres per hour. We'll see. I don't believe my speedo is anything like reliable. It barely registers 40kph when I'm hurtling along Canning Highway (speed limit 60kph) and cars aren't overtaking ... all the time. We will see.....

Tuesday, November 24, 2009

Scooters and Bikes - New beginnings


Today was a day for new beginnings. Firstly, my brother dropped off the Ariel. He had very kindly picked up the bike while we were overseas and had been holding it for me. Today he finally had access to a ute and so bought her over. Although the bike's condition was worse than I had expected she did look rather fabulous. The upper surfaces of all the grey panels are badly surface rusted. They won't buff out. I will eventually get them sand-blasted and repainted. I'm kind of keen to do that myself this time, but we'll have to see. The red areas I intend to keep 'as is.'

The bike was covered in a decades of grime that took several hours to clean it all away. Then, with the shell gleaming about as much as it ever will, I popped in a six volt battery, connected the terminals and switched on the ignition. The ammeter on the dash immediately sprung into life. I turned on the headlight and it worked perfectly. Great! Deep down I wanted to immediately pour in some petrol and give her a crank, but I restrained myself. I'll go over the engine this weekend before I even think about turning her over.

After I had cleaned the bike down I checked under the seat to confirm the engine and chassis number. When I bought the bike I was informed that the chassis number was T286A and the bike had been built in 1961. When I checked with the Ariel Club in the UK they were a little surprised as that number corresponded to the very first batch of Leaders built in 1958. The first 100 numbers were prototypes, test beds and demo bikes with the proper production starting in July 1958 with bike number 101. This means that my bike is the 185th production Leader ever made, making it one of the oldest surviving Leader's known. Unfortunately, the Ariel dispatch records for the period 1958 to 1960 have been lost so I can't confirm who the original owner was and when it was purchased.

So, the plan is - go over the engine, clean and re-oil, clutch and gearbox, check the brakes, flush through the fuel tank and carb, clean the airfilter and then - start her up. Electrically - fix the horn and stop light, install the new indicators I've bought (they aren't original but I'm not really doing a restoration). Finally, replace the tyres, which are badly perished, with the new whitewalls and then send her for inspection. Somewhere in that timeline, if I have the chance and money (hmm, always a problem) I'll see about sanding and repainting the grey panels.

After picking up the Ariel, we loaded the Heinkel and about five large boxes of parts onto the ute and took her around to the Vespa Shop. Ivo and Roberto are now ready to begin the restoration, which was far too big a job for me with my rather basic mechanical skills. I'm happy to put the job in their capable hands. The Heinkel restoration is going to be a big job and I don't expect it will be finished inside six months.


Then I picked up the Troll, which had been in having its horn replaced and some electrical problems looked at. As we were wheeling the beast out of the shop Ivo commented that whenever the Troll is in the shop people always come in and comment. Ivo should be proud of the job they did on the Troll - she looks fantastic. This time, she fired right up on the second kick and the new horn was loud and strong. Then I had a very pleasant ride home in busy peak hour traffic.

This Sunday 29 November, Piaggio Australia is organizing a Vespa riders Christmas BBW at Subiaco Oval followed by a ride through the city. It's the first event of its kind in Perth and I had intended on riding the VBB, but her lack of power always makes me wary when considering rides of any distance. I'll make a decision on the day (maybe I'll do a test run on Saturday?). More likely I'll end up riding the Troll as that way Shelly can come along too. Although it's organized by Piaggio all other scooter makes are welcome. I'll probably be relegated to the rear of the pack with Lambretta riders but that isn't such bad company!

Sunday, November 15, 2009

News from the stable


I was a little concerned when I got back from my Europe trip that the Troll would still be off the road. Much to my relief that wasn't the case. Somehow or other the cylinder had worked itself loose and the engine had lost compression. Never having seen anything like this before Ivo and Roberto were stumped as to the cause. I suspect it might just have been a symptom of many years neglect, overheating and a bit of vibration.

My first ride in four or five months was a bit stressful. The engine was running dreadfully and a howling wind made her very difficult to control. Shelly, who was following me home in the car, commented that I was wobbling all over the road. It wasn't a good start.

The next weekend I took her out for another run after cleaning the tank and adding fresh fuel. Thankfully this time she ran really well and I had a very pleasant ride. I've taken her out several times since and have been generally pleased with the performance. As I've said before, the Troll is a beautiful scooter to ride. It may not look pretty but its layout is 'just right' - the handlebars are perfectly position so you don't have to bend or stretch, the seat is perfectly comfortable, even over long distances, and the foot gears can be switched up and down with the minimum of effort. It's an excellent touring scooter. That said however there are still some problems to resolve. The battery went flat while we were away but although Roberto recharged it it has gone flat again so it isn't charging. Lack of consistent charge makes the engine stall at idle. The horn has also failed and needs to be replaced (if it isn't one thing, it's another!).

The Ariel
A couple of days before I left the Ariel Leader arrived in Perth. My brother was kind enough to pick it up and store it for me. It's still at his place and I need to arrange for it to be shipped over. In the meantime all the of the missing / replacement parts have come in so I'm all ready to go. I am quite excited about getting the bike running, registered and on the road. I don't intend a full restoration. The paintwork, especially the red sections, have many original flourishes that would be lost if it was stripped back, so I want to keep its original patina, polished up and preserved. It will also keep the cost down which will be important!